Remote Control - Hyundai HHE272006 Bedienungsanleitung

REMOTE CONTROL

1. Power on / off (standby mode)
2. Connect or disconnect to the pairing device.
3. Reset all the functions to factory settings (hold 2 seconds)
4. Treble -
5. Volume +
6. Previous song (USB & Bluetooth mode)
7. Volume -
8. Bass -
9. Select the preset mode "Music"
10. Select the preset mode "News"
11. Center volume -
12. Surround volume -
13. turn on / off the mute mode
14. Change the input channel of the device
15. Turn on / off the display
16. Treble +
17. Next song (USB & Bluetooth mode)
18. Bass +
19. Select the preset mode "movie"
20. Select the preset mode "Sport"
21. Center volume +
22. Surround volume +
23. Play/Pause (USB & Bluetooth mode)
Note: Some functions are only available when playing music
through an USB device or when the device is connected to
bluetooth.
DIFFERENT SOURCES
The surround set has different input methods; Bluetooth pairing
mode, AUX mode & USB mode.
1. When you turn on the device the soundbar automatically
opens in the input method used when the soundbar is turned
off.
2. To change the input method press the input button (14) on
the remote control.
PLAY AUDIO VIA BLUETOOTH CONNECTION
The surround set can be connected to any device (such as an
mobile phone or laptop) with an bluetooth connection. Music
and sound effects can be streamed to the soundbar.
1. Turn on surround set and then short-press the multi-function
button to switch to the BT mode.
2. Activate the pairing function on your phone or any other
compatible device and select " HYUNDAI Cinema "
3. When successfully paired, you will hear a tone and the
indicator will change from red to blue.
4. The remote control includes BT mode playback controls
Note:
1. The soundbar will automatically tries to connect with the most
recently connected device.
2. The device will automatically disconnect when the source
leaves the wireless range (10 meter). The device will
automatically reconnect when re-entering the wireless range.
3. The device will stay in bluetooth mode after being
disconnected from the source. Hold the pair button (2) for 3
seconds to reconnect a device.
Disconnect the bluetooth connection
1. You can use bluetooth settings on your mobile device.
Disable the connection will automatically disconnect the
bluetooth connection.
2. Hold the pair button (2) for 3 seconds on your remote control
to disconnect the bluetooth connection.
AUDIO INPUT(AUX)CONNECTION
1. Connect the AUX cable to the soundbar and into your TV or
device.
2. Use the Input button (10) to switch to the AUX (AU on the
display) mode of the soundbar.
PLAYING AUDIO VIA USB PORT
The sound bar automatically switches to USB input mode with
the LED display when a USB flash drive is inserted (this
mode isn't selectable on the sound bar or remote control
unless a USB flash drive is connected).
1. Ensure that your USB flash drive contains MP3
2. Connect the USB flash drive to the USB port on the sound
bar (or your own USB extension cable connected to the USB
port); music will automatically play
3. The remote control includes USB input mode playback
controls
Note: Ensure that your USB drive contains MP3 or WMA audio
files.