Hdmi Mode - Hyundai Boom HHE271901 Bedienungsanleitung

PLAY AUDIO VIA BLUETOOTH CONNECTION
The soundbar can be connected to any device (such as an
mobile phone or laptop) with an bluetooth connection.
Music and sound effects can be streamed to the soundbar.
1. Turn on sound bar and then short-press the multi-function
button to switch to the BT mode.
2. Activate the pairing function on your phone or any other
compatible device and select " Hyundai Boom "
3. When successfully paired, you will hear a tone and the LED
Display will stay on.
4. The remote control includes BT mode playback controls
Note:
1. The soundbar will automatically tries to connect with the
most recently connected device.
2. The device will automatically disconnect when the source
leaves the wireless range (10 meter). The device will
automatically reconnect when re-entering the wireless
range.
3. The device will stay in bluetooth mode after being
disconnected from the source. Hold the pair button (2) for 3
seconds to reconnect a device.
Disconnect the bluetooth connection
1. You can use bluetooth settings on your mobile device.
Disable the connection will automatically disconnect the
bluetooth connection.
2. Hold the pair button (2) for 3 seconds on your remote
control to disconnect the bluetooth connection.
AUDIO INPUT(AUX)CONNECTION
1. Connect the AUX cable to the soundbar and into your TV or
device.
2. Use the Input button (14) to switch to the AUX (AU on the
display) mode of the soundbar.
PLAYING AUDIO VIA USB PORT
1. The soundbar will automatically go to USB mode when
the USB is insterted in the USB plug on the side of the
soundbar.
2. The soundbar playback controls will function during USB
mode (play/pause, next/previous song, stop and loopback
function.
Note: Ensure that your USB drive contains MP3 or WMA audio
files.
OPTICAL MODE
1. Connect the optical cable to the soundbar and into your TV.
2. Use the Input button (14) to switch to the Optical (OP on the
display) mode of the soundbar.
3. Select the appropiate TV output. (Refer to your TV owner's
guide for more information.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS
IT CONTAINS IMPORTANT INFORMATION.
NL / EN - support@alleenonline.nl
BE / FR - support@alleenonline.be

HDMI MODE

The Soundbar supports HDMI with Audio Return
Channel(ARC). lf your TV is HDMI ARC compliant, you can hear
the TV audio through your Soundbar by using a single HDMI
cable
1. Connect the HDMI cable to the HDMI connector on the TV.
If the TV has an HDMI ARC connector use this connector
point for connecting the cable.
2. Use the Input button (14) to switch to the HDMI (HD on the
display) mode of the soundbar.
SPECIFICATIONS
Dimension:
Weight:
Bluetooth Version:
Bluetooth Range:
Audio output:
Input:
Power output:
Input Impedance:
Driver Unit:
Frequency Response:
© 2019 The Investment Company Europe B.V.
Hyundai logos are trademarks of Hyundai Corporation, Korea.
Licensed to The Investment Company Europe B.V. All rights
Distributed by The Investment Company Europe B.V.
Exclusively developed for sales in Belgium, the Netherlands
The artwork and design of this package are protected
by European copyright law and may not be reproduced,
distributed, displayed, published or used for any purpose
without prior written permission. It is not permitted to alter,
or reproduce any trademarks or copyright notice from this
Licensed by Hyundai Corporation, Korea
70 x 78 x 900mm
2.05kg
5.0
Up to 10m
2.0CH
Aux
HDMI
Optical
USB
30W*2 = 60W R.M.S
3Ω*4
4 x 2.25"
80Hz-20Khz
and Luxembourg.
PATENT PENDING
reserved.
package.