Safety Warnings - Marmitek VideoControl 3 Gebrauchsanleitung

Safety warnings

• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the
product close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures
or bright light sources.
• Do not open the product: the device contains live parts. The product should only
be repaired or serviced by a qualified repairman
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage
other than covered by the legal product responsibility.
• Adapters: only connect the adapter to the mains after checking whether the
mains voltage is the same as the values on the identification tags.
Never connect an adapter or power cord when it is damaged. In that case,
contact your supplier.
• This product is not a toy. Keep out of reach of children.
Introduction
Congratulations on buying the Marmitek VideoControl3. With the infra-red extender
VideoControl3 you can transmit infra-red signals via the existing COAX network in your
home and control all equipment connected from another room. Example: you have a
satellite receiver in the living room and a second TV in the bedroom, where you would
like to watch the satellite programs. You would like to control the satellite receiver with
VIDEOCONTROL3 TM 3