Mounting On A Wall - Samsung SWA-9200S Bedienungsanleitung

03 TROUBLE SHOOTING
There is no sound from Surround Speakers
• If the Surround speakers are successfully paired
and connected to a Soundbar, the LINK LED
indicator on the rear of the Left Surround is on and
solid blue. Please reconnect the Surround speakers
to your Soundbar referring to 02-6, LED Indicator's
status.
• Other devices sending radio frequency signals in
proximity may interrupt the connection. Please
keep your speaker away from such devices.
• The content you are playing may have no surround
track but only stereo. Please change the sound
mode to Surround by pressing SOUND MODE
button on the remote control.
There is sound jitter, delays, noise or dropout from the
sound of Surround Speakers.
• There may be sound jitter or delays when the
Surround Speakers are far from the Soundbar.
Please place them near the Soundbar.
• There may be sound jitter or delays when the
Soundbar is near an electrical device that can
cause radio interference. Please place the
Soundbar far from such devices that can cause
radio interference
(e.g. wireless router).
• Please change the TV network connection status
from wireless to wired.
The volume of Surround Speakers is too low
• Please increase the rear level referring to the
manual of your Soundbar.
(You can download the manual of your Soundbar
from www.samsung.com/support)

04 MOUNTING ON A WALL

4.2 mm
8.2 mm
• Be sure the wall is stable. If the wall is weak,
reinforce it before installation.
• Take care not to install the speakers sideways or
upside down.
• Samsung Electronics is not liable for any damage to
the product due to improper installation.
• Wall mounts aren't sold by Samsung Electronics.
05 COMPATIBLE MODELS
• Compatible with select Samsung Soundbar. Please
visit the Soundbar product page at www.samsung.
com/support for more information.
• Compatible model list is subject to change without
further notice.
ENG - 7
LINK STANDBY
7.9 mm
4.6 mm
4.0 mm