Streetz CM767 Bedienungsanleitung Seite 7

ENG
1. Strap
2. Increase volume/next song
3. Decrease volume/previous song
4. Bluetooth button
5. Play/pause/answer call/hang up/TWS
6. Power on/off, reset, voice assistant
7. Battery level indicator
8. MicroSD card slot
9. 3.5 mm, input port
10. Charge port, USB-C
11. Microphone
12. Bluetooth LED indicator
Safety instructions
1. Only use charging devices marked with 5 V to avoid
damage to the speaker.
2. Do not open up the speaker. It may damage the product.
3. Do not try to repair the product yourself.
4. Never place the speaker close to high temperature
sources.
The speaker's battery
A built-in rechargeable battery powers the speaker.
Charging
Connect the supplied charging cable to the charge input
and to a USB port on your computer or a USB charger.
The LEDs starts with flashing while charging and then
changes to lit white. When all 4 LEDs are lit then the
speaker is fully charged.
Bluetooth
The Bluetooth range is up to 10 meters.
Obstacles between this product and the Bluetooth
device can reduce the range.
Keep the device away from any other electronic devices
that may cause interference.
Short press on the Bluetooth button switches between
Bluetooth, 3.5 mm input and MicroSD card.
Power button
Press and hold the power button for about 3 seconds to
power the speaker on or off.
The Bluetooth LED flashes to confirm. You can now
connect to a Bluetooth device or use the 3.5mm input.
The speaker will turn itself off automatically after 10
minutes of inactivity.
Voice assistant
Short press on the power button to activate the voice
assistant. Works with Siri and Huawei voice assistant.
Connect the speaker
Power the speaker on. On your device search for
Bluetooth devices.
Select the speaker from the list.
The speaker will give an indication sound when the
connection is successful. The Bluetooth LED changes
to static light.
Only one Bluetooth device can be connected at the
same time.
If you want to connect another device to the speaker,
then first disconnect the current one.
Disconnect the speaker
On your device, disconnect the Bluetooth connection
with the speaker. Or press and hold the Bluetooth button
for about 3 seconds.
Reconnect the speaker
Some Bluetooth devices support automatic
reconnection, with those devices the speaker will
automatically reconnect.
The speaker will not automatically reconnect on devices
that does not support automatic reconnection.
Press and hold the Bluetooth button for about 3 seconds
to connect to the last disconnected device.
The play button's functionality
Play / pause / answer incoming call / end call = short
press on the play button.
During an incoming call press and hold the play button
for 2 seconds to reject the call.
During a call you talk via the speaker's microphone.
Press and hold the play button for 2 seconds to connect
or disconnect TWS.
Re-dial last call = Double press on the play button.
Press and hold the play button for 8 seconds to reset the
speaker and turn it off.
Change volume and song
When listening to music
Increase volume: Short press on the "+" button.
Decrease volume: Short press on the "- " button.
Previous song: Long press on the "-" button.
Next song: Long press on the "+" button.
Audio cable connection
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and
your device.
The speaker is now connected to your device.
7