amazon basics B07P897S54 Bedienungsanleitung Seite 6

Installation
Step 5: Attaching Fixture to Mounting Bracket
• Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located at the base of
each fixture.
• Loosen screw until fixture is able to rest flush over mounting bracket.
• Place one fixture over top the mounting bracket with set screws facing down. With the fixture
resting on the wall, use a 1/8" (3.3 mm) slotted screwdriver again to tighten the fixture onto the
mounting bracket.
• Make sure the fixture is secured to the wall by gently moving the post from side to side.
6
Screw clockwise