amazon basics B07P897S54 Bedienungsanleitung Seite 4

Installation
Step 1: Determine Mounting Location
• Determine where you would like to mount your bathroom hardware fixture by placing it on the wall.
• Mark the location with tape or a pencil.
• Tape your mounting template to the wall, covering the desired location.
NOTICE
Step 2: Mounting Brackets to Wall
• Using a drill and 1/4" (6.35 mm) drill bit, drill two vertical holes for each mounting bracket in the
location specified on the template paper.
4
Ensure that the template is straight by aligning a level with the center line of the
template.