Cleaning And Maintenance; Technical Data - Tectake 401166 Bedienungsanleitung

Using the grinding stone
•Use the grinding stone for removing burrs and other irregularities on the workpiece.
Checking and replacing the carbon brushes
The carbon brushes must be checked on a regular basis.
•Remove the carbon brush holders and clean the carbon brushes.
•In case of wear, replace both carbon brushes at the same time.
•Mount the carbon brush holders.
•After mounting now carbon brushes, let the machine run at no load for 15 minutes.
Use only the correct type of carbon brushes.

CLEANING AND MAINTENANCE

The machine does not require any special maintenance.
•Regularly clean the ventilation slots.

TECHNICAL DATA

Mains voltage V 230
Mains frequency HZ 50
Power input W 130
No load speed min- 1 8000 - 30.000
Collet size mm 0.8-3.2
Weight kg 0,6
Level of sound pressure measured according to EN 60745- 1:
LpA (sound pressure )dB(A) 75.6
LWA (acoustic power )dB(A) 86.6
Weighted root mean square acceleration value
According to EN 60745- 1 6.355m/s2
ENVIRONMENT
Should your machine need replace after extended use, do not put it in the domestic waste
but dispose of it in an environmentally safe way.
. 4 .