System Connections - Malone 10010790 Bedienungsanleitung

1. Connect the AC adaptor with the DC power connector on the back of the receiver. Plug the AC
adaptor into an AC 120/220 V ~ 50 Hz outlet.
2. Keep the position of antenna at a 45° angle from vertical.
3. Connect the audio cable from the audio output of the receiver to the audio input of an amplifier,
a mixer or compatible devices.
Bodypack Transmitter Connection
Lavalier Microphone Connection

System Connections

Connect the connector of supplied lavalier
microphone to the connecting jack of trans-
mitter (shown on the left). Set the transmitter
work state in wireless lavalier system.
17