System Connection; Connecting The Pocket Wireless Transmitter - Malone UHF-450 Duo1 Bedienungsanleitung

EN
18

SYSTEM CONNECTION

1. Connect the AC adapter to the DC connector on the back of the receiver.
Plug the AC adapter into an AC 120 V / 220 V ~ 50 Hz socket.
2. Set the antenna at a 45° angle from vertical.
3. Use the audio cable to connect the audio output of the receiver to the
input of your amplifier system.
CONNECTING THE POCKET WIRELESS
TRANSMITTER
Headset connection
Connect the plug of the
supplied lavalier microphone
to the connection socket of the
transmitter (as shown on the left).
Set the operating mode (L) on the
transmitter of the lavalier system.
Connect the plug of the supplied
headset to the connection socket
of the transmitter (as shown on the
left). Set the operating mode (H) on
the transmitter for the headsets.