Safety Instructions; Charging The Battery; Power Button - Streetz CM765 Bedienungsanleitung

ENG
1. Microphone
2. Increase volume/next song
3. Decrease volume/previous song
4. Bluetooth LED indicator
5. Power on/off, switch playing mode
6. Play/pause/answer call/hang up/TWS
7. 3.5 mm, input port
8. Charge port, USB-C
9. Charging LED indicator
10. MicroSD card slot

Safety instructions

1. Only use charging devices marked with 5 V to avoid
damage to the speaker.
2. Do not open up the speaker. It may damage the
product.
3. Do not try to repair the product yourself.
4. Never place the speaker close to high temperature
sources.
The speaker's battery
A built-in rechargeable battery powers the speaker.

Charging the battery

Connect the supplied charging cable to the charge input
and to a USB port on your computer or a USB charger.
The charging LED is lit during charging. The LED turns
off when fully charged.
Bluetooth
The Bluetooth range is up to 10 meters.
Obstacles between this product and the Bluetooth
device can reduce the range.
Keep the device away from any other electronic devices
that may cause interference.

Power button

Press and hold the power button for about 3 seconds to
power the speaker on or off.
The Bluetooth LED flashes to confirm. You can now
connect to a Bluetooth device or use the 3.5mm input.
The speaker will turn itself off automatically after 10
minutes of inactivity.
Short press on power button switches between
Bluetooth, 3.5 mm input and MicroSD card.
Connect the speaker
Power the speaker on. On your device search for
Bluetooth devices.
Select the speaker from the list.
The speaker will give an indication sound when the
connection is successful. The Bluetooth LED changes
to static light.
Only one Bluetooth device can be connected at the
same time.
6
If you want to connect another device to the speaker,
then first disconnect the current one.
Disconnect the speaker
On your device, disconnect the Bluetooth connection
with the speaker. Or press and hold the mode button for
about 3 seconds.
Reconnect the speaker
Some Bluetooth devices support automatic
reconnection, with those devices the speaker will
automatically reconnect.
The speaker will not automatically reconnect on devices
that does not support automatic reconnection.
Double press the power button to connect to the last
disconnected device.
The play button's functionality
Play / pause / answer incoming call / end call = short
press on the play button.
Re-dial last call = Double press on the play button.
Change volume and song
When listening to music
Increase volume: Short press on the "+" button.
Decrease volume: Short press on the "- " button.
Previous song: Long press on the "-" button.
Next song: Long press on the "+" button.
During a call
Increase volume: Short press on the "+" button.
Decrease volume: Short press on the "- " button.
Audio cable connection
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and
your device.
The speaker is now connected to your device.
MicroSD
Insert a MicroSD card and power on the speaker to
play music.
Hands-free functionality
A ringtone will be played when there is an incoming call
on the connected device.
A short press on the play button to answer.
When hands-free is activated, you talk via the speaker's
microphone.
True wireless function
This speaker supports TWS (True Wireless Sound)
functionality. This means that two speakers can pair
with each other and function as a 2.0 wireless speaker
system.