Inhaltsverzeichnis
Werbung
FAQ
Can I use DAVID X with a digital piano?
How do I make the connections to use a second
speaker or amplifier?
What is the best way to connect a delay or other
external effect to my DAVID X?
Will my condenser mic work with the DAVID X's 24
V phantom power?
DAVID X's 6" woofer is not designed for very high
sound pressure levels, but used at reasonable volume
levels, the amp can basically be employed with any
instrument and can also be used as a compact
personal monitor. Send the signal to the PA via the DI
OUT so that DAVID X also becomes a preamp, letting
you control the sound you are sending out.
The easiest way to connect an external speaker (or a
second active amp) is via the LINE OUT or DI output.
If you only have one instrument connected to your
amp, you can use the master section INSERT. For this
connection you will need a Y insert cable. Another
way of connecting the external effect is in series: the
effect must be in the chain just before the signal enters
the amp (guitar —> pedal —> amp).
DAVID X provides way more than the nominal 24
VDC, but, since it is not actually 48 VDC we cannot
legally label it P48. However, most modern
microphones will work just fine. For more technical
information, please read the FAQ section on
SCHERTLER website.
13
Werbung
Inhaltsverzeichnis
