P.Lindberg 196 cc Bedienungsanleitung Seite 139

Step 6
Attach the chute:
(1) Place the chute on the mounting plate, secure it with bolts inside and nuts outside.
(Fig. 9).
(2) Before attaching the control cable end of the discharge chute (Fig. 10), loosen the two
screws A (Fig. 10). Secure it to the rod (B, Fig. 8) with a pin (D, Fig. 10), then tighten the
two screws to the base (E, Fig. 10) to secure the cable. Press the cable onto the holder
(A, Fig. 11).
P. Lindberg A/S
Tel.: +45 70212626
18
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9066015 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk