P.Lindberg 196 cc Bedienungsanleitung Seite 137

Step 3
Install the drive control rod:
(1) Insert the angled side (Fig. 6D) of the drive control rod into the hole on the handle (Fig.
6E) to connect it to the transmission, and secure it with the washer (Fig. 6F) and cotter
pin (Fig. 6G).
(2) Attach the other end of the drive control rod (Fig. 6A) to the cotter pin on the lower
part of the gear lever (Fig. 6C) and secure it with the cotter pin (Fig. 6B).
P. Lindberg A/S
Tel.: +45 70212626
16
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9066015 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk