P.Lindberg 196 cc Bedienungsanleitung Seite 136

(2) Attach the gear end of the steering lever for turning the chute (Fig. 5A) to the
mounting plate of the chute with bolts and nuts, then tighten with a wrench. (Fig. 5)
(3) Attach the upper handle (Fig. 5C) to the lower handle (Fig. 5D) with bolt, nut and
washer, and place the handle end of the steering lever for turning the chute (Fig. 5E)
on the left side of the handles (from the operator's point of view), then tighten with a
wrench (Fig. 5B) (Fig. 5).
P. Lindberg A/S
Tel.: +45 70212626
15
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9066015 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk