Exposure; Contact Exposure: 15 Seconds; Distance Exposure: 60 Seconds; Short Exposure N2: 3 Seconds - invicon blue:tron Gebrauchsinformation

6. Exposure

Caution: Put on safety glasses before starting the exposure process.

6.1 Contact exposure: 15 seconds

Exposure area approx. 6 cm²
Step 1: Cover the repair area with plastic film.
®
Step 2: Place the blue:tron
Step 3: Tap the on/off key to turn on the light curing device.
Step 4: Press the right function button for 1 second and select the 15 second exposure mode.
Step 5: Press the left function key for 1.5 seconds to start the exposure.

6.2 Distance exposure: 60 seconds

Exposure area approx. 32 cm²
Step 1: Attach the red anti-glare cap to the blue:tron
Step 2: Place the blue:tron ®
Step 3: Tap the on/off key to turn on the light curing device.
Step 4: Press the right function key for 1 second and select the 60 second exposure mode.
Step 5: Press the left function key for 1.5 seconds to start the exposure.
6.3 Short exposure N3: 3 seconds
This function is used for fast curing of light-curable design materials LuxArt
finalen Schutzgas Lichtärtung.
Caution: This function is not suitable for curing StoneLux
Step 1: Place the blue:tron ®
Step 2: Tap the on/off key to turn on the light curing device.
Step 3: Press the right function key for 3 seconds and select the N3 exposure mode.
Step 4: Press the left function key for 1.5 seconds to start the exposure.
light head directly on the plastic film.
® light head.
light head with attached red anti-glare cap directly over the repair location.
light head about 1 cm above the curing location.
® and Luxon
® 2.0 repair materials.
® using inert gas curing.
invicon
®
blue:tron | 13