Edwards 2010-2-232-IB Installationsanleitung

2010-2-232-IB Isolator Board Installation Sheet
EN CA CS DA DE ES
1
EN: Installation Sheet
Description
The 2010-2-232-IB Isolator Module is for use with compatible
addressable fire panels, enabling isolated RS-232
communication with an external device (e.g. serial printer). No
control panel configuration is required.
Installation
WARNING: Electrocution hazard. To avoid personal injury or
death from electrocution, remove all sources of power and
allow stored energy to discharge before installing or removing
equipment.
To install the isolator module:
1. Insert the spacer through the hole on the PCB, as shown
in Figure 1, item 1. Insert the isolator module (Figure 1,
item 2) onto the spacer.
2. Attach the module onto COM0 or COM1 (Figure 2, item 1).
© 2022 Carrier. All rights reserved.
FI FR HU IT LT NL NO PL RU SK SV TR
2
Specifications
Standby current
Dimensions (W × H × D)
Operating environment
Temperature
Relative humidity
Regulatory information
Conformity
Manufacturer Carrier Manufacturing Poland Spółka Z o.o.,
Ul. Kolejowa 24, 39-100 Ropczyce, Poland.
Authorized EU manufacturing representative:
Carrier Fire & Security B.V., Kelvinstraat 7, 6003
DH Weert, Netherlands.
Contact information
For contact information or to download the latest product
documentation, visit firesecurityproducts.com.
1 / 12
50 mA at 3.3 V
20 × 10 × 36 mm
–5 to 40°C
10 to 95% noncondensing
P/N 501-407500-1-50 • ISS 16JUN22