battioni Pagani GARDA EVO Gebrauchs- Und Wartungsanleitungen Seite 146

instruction manual
for use and maintenance of the combined groups for the GARDA EVO series
19
67
24
page 128
17
15
16
14
Remove the block through
the hole of the frame.
Disassemble the block removing
the oil seal 24 and the bearing 14.
Remove the shaft 19.
Detach the Seeger 17.
Loosen the 8 screws 16.
Remove the toothed wheel 67
and the sliding hub 15.
Check the oil seal and if necessary
replace it.
Check the toothed wheel and if
necessary replace it.
Check the bearing and if necessary
replace it.