Genmitsu 4040-PRO CNC Benutzerhandbuch Seite 17

Step 7: Secure the CNC Machine to your workbench or table. (Optional)
Method 1:
1. Prepare 4 pieces of M6 screws, 4 pieces of M6 flat washer, 4 pieces of M6 nuts. The length of the screws depends on
the thickness of your table.
2. Drill 4 holes with 8mm diameter on the table according to the location of the fixing holes on the machine.
Desktop Fixing with Hole
Desktop Fixing with Hole
M6 screws
15