Free2Move eSolutions eProfessional Bedienungsanleitung Seite 184

Plug connection

Connect the plug (male connector), to the installed socket.
The plug has the following features:
Amperage
Polarity
Nominal Voltage
Frequency
Reference Standard
Risk of electric shock.
Any operation of installation, maintenance and dismantling shall be done only when
power supply is switched off on your service panel.
All safety requirements concerning RCD and MCB installation listed in chapter 2.7.
(Installation manual) should be followed.
The power supply to the device must remain switched off throughout this step.
Failure to comply with these instructions can lead to serious damage to people
and property, including death.
32A
3P+N+T
346-415V
50 Hz
EN 60309-1, EN 60309-2,
DIRECTIVE LOW VOLTAGE 2014/35/UE
14