Makita DJV140 Bedienungsanleitung Seite 5

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Cutting action changing lever
4-1. Lock-off button
4-2. Switch trigger
5-1. Lock-off button
6-1. Tool opener
7-1. Blade clamp
7-2. Jig saw blade
7-3. Protrusions
8-1. Jig saw blade
9-1. Base
9-2. Hex wrench
10-1. Cover plate
10-2. Base
11-1. Base
SPECIFICATIONS
Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular cuts.
Noise
The typical A-weighted
according to EN60745:
Model DJV140
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DJV180
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Explanation of general view
11-2. Anti-splintering device
12-1. Dust nozzle
12-2. Base
14-1. Dust nozzle
14-2. Hose for vacuum cleaner
15-1. Cutting line
15-2. Base
17-1. Base
17-2. Bolt
17-3. Hex wrench
18-1. Bevel slot
18-2. Base
18-3. Bolt
18-4. Graduations
18-5. V-notch
18-6. Gear housing
19-1. Base
19-2. Bolt
Model
Wood
Mild steel
Aluminum
-1
)
Overall length
Net weight
Rated voltage
noise level determined
) : 83 dB (A)
pA
) : 94 dB (A)
WA
) : 84 dB (A)
pA
) : 95 dB (A)
WA
DJV140
26 mm
135 mm
10 mm
20 mm
0 - 2,600
255 mm
2.8 kg
D.C. 14.4 V
ENE019-1
Vibration
The vibration
determined according to EN60745:
ENG905-1
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
5
19-3. Hex wrench
20-1. Starting hole
23-1. Rip fence
24-1. Hex wrench
24-2. Bolt
24-3. Fence guide
26-1. Fence guide
26-2. Threaded knob
26-3. Circular guide pin
28-1. Bolt
28-2. Rule bar
29-1. Guide rail adapter
29-2. Screw
29-3. Guide rail
30-1. Limit mark
31-1. Brush holder cap
31-2. Screwdriver
DJV180
26 mm
135 mm
10 mm
20 mm
0 - 2,600
257 mm
2.9 kg
D.C. 18 V
Wear ear protection
total value (tri-axial
2
) : 7.0 m/s
h,B
2
2
) : 3.5 m/s
h,M
2
ENG900-1
vector sum)
ENG901-1