Bellman & Symfon BE1411 Bedienungsanleitung Seite 24

Alternative installation – single sound source
Using the external microphone accessory
1
Connect the external microphone (sold separately) to the transmitter. Remove
the protective film and attach it to the doorbell's sound source.
2
Pull the battery tab to start the transmitter. Remove the protective film from the
Velcro and mount the transmitter on the wall.
3
Within 2 min, press the lower button 10 times to turn off the internal micro-
phone. The LEDs will blink 3 times in red to confirm.
Note: If you exceed 2 minutes, you need to restart the transmitter by removing
the batteries and putting them back in again.
1
186
2 3
x10