Sophos APX 320 Schnellstartanleitung Seite 6

5. Access Point Reboot & Reset
Reboot with current image and configuration
1. Press reset button
2. Release reset button
3. AP reboots (LED will go off, then will turn to solid green)
Reboot with current image and clear configuration
1. Press and hold reset button
2. AP reboots (LED will go off and then switch to green briefly)
3. LED will turn solid red for 5 sec. You can still cancel the configuration clearance
process by releasing the reset button before the LED starts blinking
4. LED will blink red (configuration will be cleared)
5. Release reset button
6. AP reboots with factory default settings
Reset Released
Button
Pressed
Status LED
6. Support and Documentation
For more information and technical support, please visit
www.sophos.com/en-us/support
Quick Start Guide APX 320/530/740
Reboot
Off Solid
or contact your local Sophos reseller.
Reboot clear config
5 Sec
Solid Blinking
ENGLISH
6