Samsung SNC-M300 Bedienungsanleitung Seite 64

To set a motion detection target area
You can set a specific area to detect a motion in.
1
In the MOTION window,
click the [Motion Area] button.
The Motion Area window appears.
You can set a specific area to detect
a motion in.
2
Click over square boxes corresponding
to your desired motion detection target
area.
The selected area is colored in yellow.
3
To cancel a selection, click over the
square box once again.
The square box returns to its original color.
4
To complete the setting, click the [Apply] button.
The settings are saved.
The motions in the selected area will be detected.
60_
Setting Up