Samsung SNC-M300 Bedienungsanleitung Seite 48

To Setup IP settings
1
Click <BASIC>  <IP>.
IP Setting window appears.
2
To complete the setting,
click the [Apply] button.
The settings are saved and the system is
restarted.
The currently opened web browser is closed.
When two or more cameras are
connected to a single IP sharing device,
IP-related settings and port-related
settings should be configured differently.
<IP Type>: Shows the current camera IP setting type.
- Select the IP setting type from <Static IP> or <Dynamic IP>.
<IP Configuration>: Allows setting the camera and port related settings.
- <MAC Address>: Shows the Ethernet MAC address. Since this value is used to create a DDNS
- <IP Address>: Shows the currently configured IP address. If the <IP Type> is set to <Static IP>,
you can change the IP address.
- <Subnet Mask>: Shows the <Subnet Mask> for the configured IP address.
- <Gateway>: Shows the <Gateway> address for the configured IP address.
- <DNS Server>: Shows the IP address of the DNS (Domain Name Service) server.
- <HTTP Webserver Port>: Shows the HTTP port used to connect to the camera using the web
- <Device Port(TCP)>: A port used to control video transmission. The default value is 60001(TCP).
- <TCP Streaming Port>: A port used to transfer video using the TCP protocols.
- <UDP Streaming Port>: A port used to transfer video using the UDP multicast protocols.
- <Upload Port(TCP)>: A port used to upgrade software. Default value is 60004(TCP).
<Multicast Settings>: To transmit a video using UDP Multicast, you can set the IP address, port and
- <Multicast Address>: Shows IP address set for video transmission using UDP Multicast.
- <Multicast Port>: Shows UDP port set for video transmission using UDP Multicast.
- <TTL>: TTL stands for "Time To Live" that allows you to set the number of routers so that the packet
can pass through. Each router decrease the TTL value one by one when a packet passes
it through. If the TTL value reaches 0, the packet cannot pass through a router. The default
value is 63. It is recommended to set it to between 0 and 255.
44_
Setting Up
address, confirm the value.
browser. The default port number is 80(TCP).
The default value is 60002(TCP).
The default value is 60003(UDP).
TTL.
The default value is 225.128.1.128. It is recommended to set it to between
224.0.0.0 and 239.255.255.255.
The default value is 60005(UDP).