Herunterladen Inhalt Inhalt Diese Seite drucken

Manual Network Setting - Samsung SNC-M300 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

setting static ip

mANUAl NETWORk SETTING

Run the <IP Installer.exe> program and display the camera list found on the screen.
For the initial run, the [Auto Set] and [Manual Set] button are all disabled.
1
Select a camera you want from the
camera list.
Confirm the MAC Address of the camera
on its rear panel.
The [Auto Set] and [Manual Set] button
are activated.
2
Click the [Manual Set] button.
The Manual Set window appears.
The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP Port> values of the camera are displayed
in their default values.
The password is set to "4321" by factory default.
3
Set up the IP related settings in
the <ADDRESS>field.
<MAC Address>: The MAC Address
printed on the camera rear penal is
automatically displayed. No additional
setting is required.
<If using an IP router>
<IP Address>: Set it according to the private
IP address range provided by the IP Router.
ex) 192.168.1.2~254, 192.168.0.2~254,
or 192.168.XXX.2~254
<Subnet Mask>: The IP Router's <Subnet Mask>
becomes camera's <Subnet Mask>value.
<Gateway>: The IP Router's <LAN IP Address>
becomes camera's <Gateway>value.
<If not using an IP router>
For the <IP Address>, <Gateway> and
<Subnet Mask> settings, contact your
network administrator.
22_
Setting Static IP
1
3
2
3

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis