AVENLI 17798 Serie Benutzerhandbuch Seite 10

Flat surface - CORRECT
PART 4 - Pool Installation
IMPORTANT: If any parts are missing, do not start assembly. If you need replacement
parts, call your local customer service number.
Number of persons required for assembly: at least 2 adults.
Total length of installation excluding time required for site preparation and water
filling:
30 minutes for size F10'×30"/F12'×30"
•
45 minutes for size Ф14'x33"
•
Step 1. CHECKING THE COMPLETENESS OF DELIVERY
Remove all components from the box(es) and place them on the ground at the
mounting location. Check each component according to the "COMPONENT REFERENCE".
Check that all necessary components are present.
Step 2. INSTALLATION OF THE DRAIN VALVE COVER AND PLUG
Check that the outer drain plug is inserted into the outer drain cap and that the drain
valve cover is screwed on and tightened securely. Fit the plugs to the connecting holes.
(Drain plugs vary depending on pool size.)
Stopper
STEP 3. INSTALLATION OF THE HORIZONTAL SUPPORT
Drain valve cover
Uneven sloping surface - INCORRECT
Drain plug A
10
Drain plug B