General Safety Instructions - Julius Mayer JM35-F Serie Montageanleitung

EN
Important safety instructions!
For the safety of persons it is im-
portant to follow these instructions!
Please keep the manual and hand
it over to the new owner in case of
change of ownership!
This appliance can be used by chil-
dren aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if they
have been given supervision or inst-
ruction concerning use of the appli-
ance in a safe way and understand
the hazards involved.
Children are not allowed to play with
the device.
Cleaning and maintenance by the
user must not be carried out by chil-
dren without supervision.
WARNING!
The motor must be disconnected
from its power source during clea-
ning, maintenance and parts replace-
ment.
After unpacking, compare the motor
type with the corresponding infor-
mation on the nameplate. Incom-
plete devices or devices that do not
comply with the specifications must
not be put into operation.
WARNING!
Non-observance may result in dan-
ger to life!
There is a danger to life from electric
shock when working on electrical
equipment!
The mains connection of the motor
and all work on electrical installa-
20

GENERAL SAFETY INSTRUCTIONS

tions may only be carried out by an
authorized electrician in accordance
with the connection diagrams in this
manual.
Carry out all assembly and connecti-
on work in a de-energized state.
When using the device in damp
areas, observe the regulations for
installation in damp areas, especially
DIN VDE 0100, Parts 701 and 702.
Observe the protective measures
contained in these regulations.
The use of defective devices can
endanger persons and cause dama-
ge to property (electric shock, short
circuit).
Never use defective or damaged
damaged devices.
Check that the motor and power
cord are intact.
Please contact our service depart-
ment (see last page for contact
details) if you notice any damage to
the device.
ATTENTION!
It is essential to observe the installa-
tion and connection instructions!
Improper installation and assembly
can lead to serious injuries!
Lay the power cable of the motor
internally in the empty conduit up to
the junction box, observing the local
electrical regulations.
Mains cables must not be laid in the
winding space of the plant. Make
sure that the power cable does not
come into contact with moving parts
of the plant.
20