MALTEC DH-12000 Bedienungsanleitung Seite 28

5.3.2 CONTINUOUS DRAINING
For continuous operation or unattended dehumidification, please connect the attached
drain hose to the unit. Condensate water can be automatically flow into a bucket or drain
by gravity.
Set the unit in a horizontal surface and stable position.

Switch off the unit before operating.

Remove the plug of the water outlet opening, and keep it in safe area.
Securely and properly connect the drain hose and make sure it is not kinked and clear

of obstruction.
Place the outlet of hose over a drain or bucket and ensure that water could freely flow

out of the unit.
Do not submerge the end of hose into water; otherwise it can cause "Air Lock" in the hose.
To avoid water spillage:
•
As the negative pressure of condensate drain pan is large, tilt the drain hose
downward toward the floor. It is appropriate that the degree of inclination should
exceed 20 degrees.
Straighten the hose to avoid a trap existing in the hose.
28/48