Basic Operations; Power On/Off - Jackery Explorer 2000 Pro Benutzerhandbuch

Basic Operations

Power On/Off

AC Output On/Off: Press the AC Button, the AC Output operation indicator lights up. Then you can
connect the equipment that needs AC charging. Press the AC Button again to turn off the AC Output.
USB Output On/Off: Press the USB Button, the USB Output operation indicator lights up. Then USB-A
and USB-C Output Ports can be connected to external load devices. Press the USB Button again to turn
off the USB Output.
Car Port On/Off: Press the Car Port Button, the Car Port operation indicator lights up. Then the Car Port
can be connected to the external load devices. Press the Car Port Button again to turn off the output.
LCD Screen On/Off
To Turn On, press the DISPLAY Button, any Output Power Button, or LED Light Button. Or, when there's a
charging input, the screen display will light up automatically.
To Turn Off, press the DISPLAY Button again and the screen display will turn off. Or, if there is no operation
in 30 seconds, the product will enter a sleep state and the screen display will automatically turn off.
To get the screen always-on (under charging or discharging state), follow these steps: After the
display screen lights up, double-click the DISPLAY Button and the mode of Always-On Display will be on.
To turn off Always-On Display, follow these steps: Press the DISPLAY Button and the screen will be
turned off in 30 seconds.
Tip:
During Always-On mode, the screen automatically turns off after 2 hours without charging or discharging.
9
GB
Car Port Button
AC Button
USB Button