Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONTROL PANEL
1. Temperature indicator LED
2. FastFreeze indicator
3. FastFreeze button
4. Temperature regulator
ON/OFF button
Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.
Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required temperature
lights up. Selection is progressive, varying
from 2°C to 8°C. Recommended setting is
4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any
time you touch the temperature regulator,
the setting moves by one position. The
corresponding LED blinks for a while.
1
1
2
2
4
4
3
3
2. Touch the temperature regulator until
the required temperature is selected.
The set temperature will be
reached within 24 hours. After
a power failure the set
temperature remains stored.
FastFreeze function
The FastFreeze function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time, protects
food products already stored in the freezer
compartment from undesirable warming.
To freeze fresh food activate
the FastFreeze function at least
24 hours before placing the
food to complete pre-freezing.
To activate FastFreeze function press the
FastFreeze button. The FastFreeze
indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing FastFreeze button
again. The FastFreeze indicator switches
off.
Door open alarm
If the fridge door is left open for
approximately 5 minutes, the sound is on.
During the alarm the sound can be muted
by pressing any button. The sound
switches off automatically after around
one hour to avoid disturbing.
The alarm deactivates after closing the
door.
Leonard 9
Werbung
Inhaltsverzeichnis
Fehlerbehebung
