Dantherm Gulliver RG2 Bedienungsanleitung Seite 4

Oilburner
Type Gulliver RG2
The user is responsible for the burners working order and that the following points are observed.
Please check before ignition:
– that the valves on the oil pipes are open
– that the flue system is clear
– that the access door and inspection eye
are tight
– that the thermostats are adjusted to the
right temperature.
The furnace room and the room containing the oil tank must bee clean and tidy at all times. Inflam-
mable materials, including selfigniting and explosive materials must not be stored in these rooms.
Max. oil cons.:
Control box:
Type of oil:
Flue pipe dimens.:
Installation data:
The oil burner and air heater, should be inspected and adjusted once a year, to maintain good en-
vironmental and economical operation.
Because of wear and tear the following components shall always be replaced during af complete
overhaul:
If the installation is provided with a prefilter, the filter cartridge and the o-ring should also be repla-
ced.
K:\framen\instrukt\Dantherm\RG\Engelsk\RG2\RG2.fm-B1-021106-Dm/lbk
Instruction
This instruction should be kept in the furnace room
Regulations:
app. 11,9 l/h
550 SMD
Gas oil
Ømm
Maintenance:
– Oil nozzle
– O-ring for oil pump
– Filter for oil pump
Interruptions:
– PRESS THE BUTTON ON THE CON-
TROL BOX!
also check:
– that the room thermostat is adjusted hig-
her than the temperature in the room
– that the fuses are in good order
– that the safety thermostat have not been ac-
tivated
– that there is oil in the tank.
Installer:
GB