Technical Data - P.Lindberg 9049036 Bedienungsanleitung

EN
Original
User Manual
Plate Compactor - Item no.: 9049036
Description: Petrol-driven plate compactor. The machine design uses a compactor
plate, eccentric unit, motor plate and petrol engine. The compactor and engine part
are connected using strong rubber absorbers. Power is transferred via a V-belt from
the engine to the eccentric unit. The machine is operated and controlled using a
handlebar with rubber absorber. The machine can also be fitted with a paving matt.
This may only be used on flagstone paving.
Use: For tasks where material must be compacted down to approximately 30 cm
depth.
Intended use: Use only as described in this manual – any other use is considered
incorrect.

Technical Data

Engine
Engine type
Engine speed
Engine oil
Weight
Eccentric frequency
Compaction depth
Limited grade ability
Sound pressure level LPA
Sound power level LWA
Guaranteed sound power level LWA
Hand-arm-vibrations
Centrifugal force
Working speed
Capacity
Plate dimensions
Transport dimensions
ATTENTION
Remember to fill engine oil before starting!
P. Lindberg A/S
Tel.: +45 70212626
Air-cooled, 4-stroke, 1 cylinder Recoil starter
Loncin 200F, 4.0 kW
3.600 rpm
Quantity: 0.6 l
Type: 10W40 or 15W40
87 kg
7,000 vpm (vibrations per minute)
30 cm
20 o
96,4 dB (A)
107,07 dB (A)
108 dB (A)
19,7 m/s 2
19,8 Kn
48 cm/s
2
760 m /h
60 x 44 cm
61 x 48 x 80 cm
1
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9049036 EN V4
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk