Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 700.050 Bedienungsanleitung

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Problem
No cooling effect
at all.
Cooling effect
insufficient.
Cause
• Plug not connected to
socket.
• Defective fuse.
• Power breakdown.
• Direct sunlight or heat
sources nearby.
• Bad air circulation around
the device.
• Door is not closed
properly or has been open
for too long.
• Door sealing is damaged
or deformed.
• Interspaces between the
foods or beverages are
too small or too many
foods are stored.
• Temperature control was
adjusted falsely.
Solution
• Connect the plug properly.
• Check the power supply.
• Check the power supply.
• Remove mini-refrigerator
from the heat source.
• Arrange sufficient space
between walls and other
items.
• Properly close the door.
Keep the door opening
periods low.
• Contact the retailer.
• Arrange sufficient space
between the foods or
beverages in the mini-
refrigerator and remove
dispensable foods or
beverages.
• Re-adjust the temperature
control.
- 27 -