11 Operation
Note:
– The product will not operate if connected to a completely flat battery.
– Only the "Battery test" can be performed on a standalone battery not con-
nected to a vehicle.
11.1 Navigating the system menu
1. Press the EXIT button to enter settings.
2. Press ▲ / ▼ to scroll through menu items.
3. Press ENTER to make a selection.
11.2 Battery test
Perform this test to determine the overall health of the battery.
P
reconditions
(If applicable) vehicle is prepared.
D
Battery is prepared.
D
Battery compatibility was checked.
D
Tester cables are connected.
D
(If applicable) electrics are switched OFF.
D
1. Select "Battery Test". The battery voltage will show.
Battery Test
Battery Test
Language
Beeper
Contrast
32
1/4
12.43V