Product - VOLTCRAFT VC-BT100 Bedienungsanleitung

If it is no longer possible to operate the product safely, take it out of operation
and protect it from any accidental use. DO NOT attempt to repair the product
yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.

8.5 Product

People with pacemakers should consult a doctor before use. Electromagnetic
fields in proximity can cause pacemaker interference and/or failure.
Always switch the vehicle engine and electrics OFF before connecting the prod-
uct.
Keep battery contact terminals clean. Contamination can lead to incorrect meas-
urement results.
Risk of electic shock! Never use the product with wet hands.
Risk of electric shock! Check the insulation layer of the battery clamps is in
normal condition (no damage, bareness, or disconnection).
Use the product in a well-ventilated area. Explosive / noxious gases may be
produced / present during use.
Avoid creating sparks when connecting battery leads. Sparking may damage
the vehicle electrical system and/or ignite flammable substances.
Risk of burns! Engines compartments can become dangerously hot after use.
Always allow to cool to room temperature before connecting the product.
Risk of eye injury! Always wear eye protection when working around batteries.
Always keep hair, hands, clothing, tester leads, and cords away from the product
and vehicle when working.
Always put the vehicle transmission in PARK (automatic transmission) or NEU-
TRAL (manual transmission) and make sure the parking brake is engaged.
28