Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The display changes during the 6 s.
This does not influence functioning.
Sequence during changing
I f the button is pressed and then held for > 6 s, the meter performs the
command shown in the display.
After 8 changes, it is no longer possible to change the installation position.
The possibility of changing lapses either immediately upon
detection of water, or after three hours' operation without error
detection (pre-set ex works).
The following indication appears in the display (example):
When changing the installation position, the sensors must be
matched to the actual installation (see chapter 4).
-34-
Deutsch
Button pressed < 3s
English
Button pressed > 3s
I n each change, the framed
number in the display is
reduced by 1.
The changes indication dis-
appears.
Werbung
Inhaltsverzeichnis
