Using Smart Functions - Sinji SMART PANEL HEATER Bedienungsanleitung

EN
4.5 Time for switching on
To schedule your heating to turn on later, press the TIME button in standby mode. U. The delay range is 1 - 24 hours. The numbers
will flash during the setting process and then the display will return to heating mode. The timer icon on the display indicates that the
timer has been set. The heater will be switched on when the delay has elapsed.
4.6 Child lock
To activate the padlock, press and hold the UP button. The padlock icon will appear on the screen and the control panel will be locked. To unlock,
press and hold the DOWN button. The padlock icon will disappear, indicating that all buttons can be used again.
4.7 Switching off the display
Pressing and holding the time button will turn off the display illumination. Press any button later to turn the display back on. When the display is off,
the Smart Panel Heater can still be operated via the app, but it will not make any sound when changing settings.
4.8 Remote control
The remote control button and functions are all the same, but the buttons on the remote control do not have a "hold" function. The
range of the remote control is 2 metres.

5. USING SMART FUNCTIONS

The same actions can be performed in the Smart Life app as on the control panel.
In addition, smart scenarios can be set, which allow the device's settings to be adjusted when various conditions are met. For
example, weather conditions that require the device to be on or off, or sunrise or sunset that require the device to be on or off. You
can also create scenarios in which the device works together with other Smart Home devices that you have added to the Smart Life
app.