Inhaltsverzeichnis; Install The Smart Life App; Add The Smart Panel Heater To The App - Sinji SMART PANEL HEATER Bedienungsanleitung

DESCRIPTION
Always keep your bedroom, living room or outdoor toilet at the desired temperature with the Smart Panel Heater! For example, let it
start heating before you wake up, or stop heating when the sun goes down. Make heating as smart as you want with
self-programmed schedules.
CONTENTS
1x Smart Panel Heater
2x base
6x plug
8x M4*8mm screws
6x M4*35mm screws
1x remote control
4x mounting bracket
1x operating manual
USER MANUAL
1. Install the Smart Life app
2. Add the Smart Panel Heater to the app
3. Install the Smart Panel Heater

1. INSTALL THE SMART LIFE APP

1. Download the Smart Life app for iOS or Android for free.
2. Open the Smart Life app and tap 'Register' or log in with an existing account.
3. Read the privacy policy and tap 'Agree' to continue.
4. Please enter your e-mail address to receive a verification code, which will be sent to the e-mail address provided.
5. Enter the verification code to proceed to the next screen.
6. Choose a secure password and tap the button to complete your registration.
7. Go to 'Account' and tap 'Family management' to set up your smart home. Enter a name for your smart home and select which
rooms you want to add.
8. Tap 'Done' to complete the installation.

2. ADD THE SMART PANEL HEATER TO THE APP

The Smart Panel Heater can be added in two different ways:
a) By scanning the QR code
b) Manually
A) Scanning the Qr Code
1. Switch on the Smart Panel Heater.
2. Make sure your smartphone is connected to your Wi-Fi network*.
3. Open the Smart Life app and tap '+' to select the device you want to add.
4. Open the Smart Life app and press the plus sign in the top right of the main screen to add a device:
TECHNICAL SPECIFICATIONS
Power
Power supply
Frequentie
Nominal heat prod.
Dimensions
4. The control panel
5. Using smart functions
6. Problems and solutions
1500W
210-240V
50~60Hz
2 kW
67 x 42,5 cm
EN