GGM gastro BISTROT 465 Bedienungsanleitung Seite 15

WARNINGS:
You can start with the washing cycle only if the oven is not baking and if the
products (detergent and rinse aid) have been filled.
It is advisable to perform the washing cycle when the oven is cold.
If the temperature of the oven chamber is too high to run the washing, the cooling
program "Cool" is performed automatically. Upon reaching the proper temperature, the
oven goes on to perform the washing program previously set.
During the execution of the washing program, the control board is completely inhibited.
Once the washing program is finished, absolutely unmount the rotating nozzle from the
oven's chambre. DO NOT PROCEED IN ANY WAY COOKING WITH THE ROTATING
NOZZLE INSTALLED IN THE OVEN'S CHAMBER, OR IT'S GOING TO BE
IRREPARABLY DAMAGED.
Contacts for the detergent and rinse aids to be used:
GGM GASTRO developed an innovative product serving both as detergent and rinse aid
simultaneously.
In case a single product serving as detergent and rinse aid is used, insert just the detergent
suction pipe of the washing system in the unique product container.
Pag. 13