Trouble Shooting; Technical Data - MIA LU 0171 Bedienungsanleitung

store the unit unused for a long period of time.
5) Clean the whole unit, and make sure that all parts of the unit are dried completely before
unused for longer period of time.
6) Do not use sharp chemical detergents for cleaning.
How to clean the transducer:
1) Put 5-10 drops of descaling agent on the surface of the transducer, wait for 2-5 minutes;
2) Brush out the scale off the surface.
3) Rinse the transducer with clean water.
How to clean the basin unit:
1) Clean the water basin with soft cloth and the descaling agent if there is scale in it.
2) If the basin shows lime residues, put water with few drops of descaling agent and clean it
out with the brush.
3) Rinse the water basin with clean water.
Storing:
Make sure to clean all the parts and have them dried before storage. The original package
is the best to store the unit. Store the unit in a dry place, not reachable for children.

Trouble shooting

Any trouble found in normal operation, please kindly refer to the following points:
Trouble
Power lamp off,
does not work
Power lamp on, no
mist outlet with wind
Abnormal smell
Power lamp on, unit
doesn't work
Abnormal noise

Technical data

220-240 Volt~ 50 Hz 30 W; Protection class II
This appliance is tested according to GS regulations and is built to CE directives.
Possible reasons
No power supply
No water in water tank
New unit
Dirty water or long time staying
water
Too much water in the water basin
Resonant in water tank when
waterless
Unit stands on an unstable surface
Shooting Way
Connect power supply,
switch on
Fill water into water tank
Take out water tank, open
cover, let it stay 12 hours in
cool position
Cleaning water tank, fill in
clear water
Pull out same water from
the water basin, closed the
cover of water tank tightly
Fill water tank with water
Move the unit to a stable flat
surface
15