A&D GX-AE Schnellstartanleitung Seite 6

EN
2-1 Precautions
To get the optimum performance from the balance and acquire accurate weighing data, note the
following:
□ Install the balance in an environment where the temperature and humidity are not excessive.
The best operating temperature is about 20°C±2°C at about 45 ~ 60%RH relative humidity.
□ Install the balance where it is free of dust.
□ The weighing table should be solid, free from vibration and drafts, and as level as possible.
(An anti-vibration table or stone table is ideal)
□ Install the balance in a stable place avoiding vibration and shock. Corners of rooms on the first floor
are best, as they are less prone to vibration.
□ Install the balance where it is not affected by heaters or air
conditioners.
□ Install the balance where it is not exposed to direct sunlight.
□ Install the balance away from equipment which produces magnetic fields.
□ Level the balance by adjusting the leveling feet and confirm it using
the bubble spirit level.
□ Warm up the balance for at least 30 minutes. Plug in the AC adapter
as usual.
□ Calibrate the balance before use or after moving it to another
location. Refer to the separate instruction manual "7. Calibration".
Caution
Do not install the balance where flammable or corrosive gas is present.
How to adjust the bubble spirit level
Red circle
Bubble
OK
When the bubble is off to the left:
Turn the leveling foot on the front right in the clockwise
direction.
When the bubble is off to the backward position:
Turn both leveling feet on the front in the clockwise
direction at the same time.
UP
Leveling
foot
DOWN
Not OK
6
When the bubble is off to the right:
Turn the leveling foot on the front left in the clockwise
direction.
When the bubble is off to the forward position:
Turn both leveling feet on the front in the counter
clockwise direction at the same time.
OK Not OK
Leveling
Bubble spirit level
foot
DOWN
UP
Leveling
foot