Intended Use; Electrical Safety - Status SD300 Originalbetriebsanleitung

SD300 / SD300/2
SD300
SD300/2
5

1. INTENDED USE

2. SAFETY ADVICE
INTENDED USE
This electric drill is intended for the drilling of wood, ceramic, plastic, and metal
working, as well as tightening and loosening screws.
Only adults may use this tool.
Any other usage is inappropriate. Tampering with, or using parts which were not
reviewed orapproved by the manufacturer, is also inappropriate. Inappropriate
use may cause unpredictable damage to the user and surrounding objects.
The manufacturer assumes no responsibility for damages resulting from
inappropriate usage.
SAFETY ADVICE
WARNING!
Read all instructions carefully. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
The term "power tool" in all the warnings listed below refers to your mains
operated (corded) power tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA
• Keep work area clean and well lit.
Cluttered and dark areas incite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
• Connect the electric power tool to electricity, using a 16/25 A maximum secure
contact protected outlet (230/120V~, 50/60 Hz). We recommend you to attach
a residual current circuit-breaker (RCD) that does not exceed 30mA.
EN
3