ABMESSUNGEN
DIMENSIONS
Alle Maße in mm
All dimensions in mm
MONTAGE
INSTALLATION
In order to achieve an optimum air circulation, the heater should be mounted in the
bottom section of the enclosure, with the cable entry facing downward. The heater can
be mounted via a retaining clip (35 mm mounting rail to DIN EN 50 022).
Keep a minimum distance of 50 mm down- and upwards, as well a minimum distance
from neighboring pieces of at least 40 mm.
5
Um eine optimale Luftzirkulation zu erreichen, sollte die Heizung
senkrecht im unteren Bereich des Schaltschranks mit dem An-
schluss nach unten eingesetzt werden. Die Heizung kann über
eine Halteklammer (35mm-Tragschiene nach DIN EN 50 022)
montiert werden.
Es ist ein Abstand zu benachbarten Geräten von mindestens 50
mm nach unten und oben, sowie ein seitlicher Abstand von min-
destens 40 mm einzuhalten.
Bezeichnung Type
L
SH 75D
185
SH 100D
215