ABMESSUNGEN
DIMENSIONS
Alle Maße in mm
All dimensions in mm
MONTAGE
INSTALLATION
Um eine optimale Luftzirkulation zu erreichen, sollte die Heizung im unteren Bereich des Schaltschranks mit dem
Anschluss / Lüfter nach unten (Ausblasrichtung nach oben) montiert werden. Die Heizung wird mittels der Halte-
1
5
klammer (35mm-Tragschiene nach DIN EN 50 022) montiert.
Es ist ein Abstand zu benachbarten Geräten von 100 mm nach unten
(Ansaugrichtung) und 300 mm nach oben (Ausblasrichtung), sowie ein
seitlicher Abstand von mindestens 50 mm einzuhalten.
In order to achieve an optimum air
circulation, the heater should be
mounted in the bottom section of
the enclosure, with the cable entry /
fan facing downward (blowing side
upwards). The heater is mounted via
the retaining clip (35 mm mounting
rail to DIN EN 50 022).
Keep a minimum distance of 100 mm
downwards (sucking side) and
300mm upwards (blowing side), as
2
well a minimum distance from neigh-
boring pieces of at least 50 mm.