SUPAIR START Betriebshandbuch Seite 23

START reserve user's manual
Installing the tandem reserve
parachute.
1.
Connect the risers to the parachute using
a rectangular 7 mm stainless steel ( Inox )Maillon
Rapide®, then use toric elastic rings to secure the
bridles to the Maillons as indicated below.
Toward the reserve
parachute.
Toward the spreader-bars.
2.
Connect the risers atop each spreader-
bar ( main hooking location ), with the rectangular
Inox ( stainless steel ) Maillon Rapide® + use toric
elastic.
Toward the « B « or
« C « wing risers.
Parachute riser.
Pilot.
3.
On both sides, push the small recoil « André
Rose « strap / webbing, through the main paraglider
carabiner riser, and connect it to the « B « or « C «
paraglider riser using a triangular Maillon Rapide®.
Maillon and riser denomination can vary from
manufacturer to manufacturer.
« Rose «
System.
Passenger.
Pilot.
Passenger.
SUP'AIR _START Page 8