Programming
Press SET briefly and set the current time first:
00:00
On the display, the hours flash under CURRENT TIME
12:00
Press or to set the hours
12:00
Briefly press SET and the minutes will flash
12:25
Press or to set the minutes
Press SET briefly to set the spread distance:
Under DISTANCE the L will flash (longest spreading distance: about 3 metres)
Press or to select M (middle: approx. 2 metres) or S (shortest: approx. 1 metre)
Press SET briefly to set the starting time for the first feeding:
1
00:00
SET TIMER and
will appear on the display and the hours will flash
06:00
Press or to set the hours
06:00
Briefly press SET and the minutes flash
06:30
Press or to set the minutes
Press SET briefly to set the dosing time for the first feeding:
00
RUN TIME will appear on the display and the seconds will flash
20
Press or to set the seconds (between 0 and 20)
Press SET briefly to set the next feeding:
1
2
00:00
The
changes into a
and the hours will flash
Then set the starting time and dosing time for the second feeding.
Repeat the steps above to set the six feeding options.
00:00
00
If you want to give less feeds per day, leave the starting time on
and the dosing time on
, the feeding
will then not take place.
Once all feeds have been programmed the Fish Feeder is ready for use.
NOTICE! Check regularly whether there is sufficient food in the container.
Quantity of food
The dosing time (RUN TIME) allows you to set how much feed is dispensed per feeding session. You can set the dosing
time between 0 and 20 seconds, with a longer dosing time more feed is dispensed. The set spread distance of 1 metre
(S), 2 metres (M) or 3 metres (L) also affects the feed quantity. When feeding small pellets (2-4 mm), the insert ring
should be placed. The mentioned values in the table are based on Hikari Staple and give an indication, test the set
amount yourself when using. The number of grams of feed per dosing time/spread distance also depends on the
specific weight of the feed used.
6