Using The Appliance; Display And Control Panel; Information On The Frost Free Technology; Temperature Settings - EAS ELECTRIC EMC177ABI Bedienungsanleitung

3 USING THE APPLIANCE

3.1 Information on the Frost Free
Technology
The Frost Free refrigerators have a
different operating
system to static
refrigerators.
In normal (static)
fridges, the humidity
entering the fridge
due to opening the
door, and the humidity
inherent in the food,
causes frost build-up
in the freezer
compartment.
To defrost the frost
and ice in the freezer
compartment, you are
required to periodi-
cally switch off the
fridge, place the
frozen food
in a separate cooled
container, then
remove the ice gathered in the
freezer compartment.
The situation is completely different
in No-frost fridges. A built-in fan
blows dry and
throughout the cooler and freezer
compartments.
disperses uniformly between the
shelves, ensuring all your food is
cooled equally,
humidity and
Therefore, your No-frost fridge allows
ease of use, in addition to its huge
capacity and stylish appearance.
cold air evenly
The cold air
thus preventing
frost build-up.

3.2 Display and Control Panel

1 2
Using the Control Panel
1. Temperature set button
2. Super cooling symbol (Super
cooling LED)
3. Alarm symbol (Alarm LED)
4. Adjusted temperature indicator
3.3 Operating your Fridge Freezer
Lighting (If available)
When the product is plugged in for
the first time, the interior lights may
turn on 1 minute late due to opening
tests.
3.3.1 Temperature Set Button
This button allows setting tempe-
rature of the fridge. In order to set
values for fridge partition, press this
button. Use this button also to activate
super cooling mode.

3.3.2 Temperature Settings

• It ensures that the temperature
settings in the cooling and freezing
compartments of your refrigerator
are performed automatically. It may
be set to any value ranging from
MIN to MAX and super cooling
mode. As you press temperature set
button from MIN to MAX, the tem-
perature decreases. To save energy
in winter months, operate your
refrigerator in a lower position.
• Initial temperature setting for refri-
gerator is at the middle point.
• Every time you press temperature
set button, setting temperature will
decrease until super cooling symbol
and if you keep on pressing the set
temperature
temperature again.
EN - 60
3 4
will be min set
V.2