Pettec Remote Spray Trainer 4.0 Anleitung Seite 25

How the remote control buttons work
Sprayt force selection („
1
The spray force is adjusted by one level each with the up and down keys.
Tone only button (upper button „TONE")
2
Sends an audible tone to the trainer. No Spraytion is delivered.
Spray only button (middle button „SPRAY")
3
Delivers Spray through the contact area on the remote control at the
level shown on the digital display. When held down for ten consecutive
seconds, the trainer will "time-out", and Spray cannot be delivered for
five seconds. You must release and press the button again after the five
second time-out period, before additional Spray can be delivered.
Dog Toggle Switch (lower button „1|2")
4
The switch button allows the user to choose between two different trai-
ners. Thus two trainers can be used with one remote control.
PetTec-Tipp:
To connect a second trainer, please set the toggle switch to 2 and switch on
the trainer to be connected. The new trainer connects to the remote control by
simultaneously pressing the tone signal and spray buttons.
")
25