Operation Methods - RUSTA 901513010101 Gebrauchsanweisung

ENG

OPERATION METHODS

• Connect the hose accessories: Insert the hose end into the hose socket at the front
cover and then hook it. (Fig1)
• Remove the hose: Press the adaptors at both side of the hose end and then pull the
hose accessories. (Fig2)
• Connect the metallic tube to the curves end of the hose. (Fig3)
• Connect different nozzle tools to the tube for different cleaning purpose: Floor brush
(adjust to the type of ground) for carpet or floor (Fig4,5); combine brush & nozzle for
sofa, wall surface, curtain, corner or space between furniture and etc. (Fig6)
• Turn on the machine: insert the plug of cord into the power socket which conform to
that on the label for power supply, and press the on/off switch pedal, the machine
could start working. (Fig7)
• Cord rewinding: Hold the plug and pull out the cord; press the cord rewinding pedal,
that power cord will be drawn in. (Fig8)
Fig. 1
Fig. 5
FAILURE CLEARANCE
LESS VACUUM POWER OF THE CLEANER
1. The cleaner can be used as tip the rubbish out of the full dust cup or the dust bag.
2. If blockage is found in ground brush, hose or tubes, the machine can be re-operated
only after the blockage is cleared away.
4
Fig. 2
Fig. 6
Fig. 3
Fig. 7
Fig. 4
Fig. 8